O problema aconteceu após uma tentativa de istalar minha webcam, sempre que eu conectava ela
na porta aparecia essa mensagem "Code 43 Windows has stopped this device because it has reported
problems". Então eu resolvi pesquisar no google e encontrei aqui no site da Microsoft uma pergunta
e uma resposta sobre este problema que está logo abaixo:
-------------------------------------------------------------------------------------------
Question:
Code 43 Windows has stopped this device because it has reported problems
Applies To: Windows | Windows Vista | Hardware and Drivers
Essentially, my PC won't recognize my GoGear Opus MP3 player (or iPod nano). However, I am using
a USB mouse and keyboard at the moment with no problem. I had this same problem on this PC when
I had Vista. I upgraded to 7 hoping this issue would be solved, but it is still there.
Resposta:
Hi Makavali,
Welcome to Microsoft Answers forum.
Method I
I would suggest you to run the hot fix and see if that helps.
If your high-speed USB 2.0 ports don't work, you might not have the correct driver installed for the ports in your computer, or the ports might be defective. If you are using an external USB hub plugged into your computer, this might also be defective or lack the proper drivers. Check Device Manager to see if your USB ports or hubs are working properly.
1. Open Device Manager by clicking the Start button , clicking Control Panel, clicking System and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
2. Double-click Universal Serial Bus controllers and check to see if all your USB ports, hubs, and controllers are functioning correctly. Any devices not functioning will have a yellow exclamation mark in front of them.
3. If Device Manager shows any USB ports, hubs, or controllers are not functioning, check for updated drivers. For more information, see Update a driver for hardware that isn't working properly.
Additional Information: http://windows.microsoft.com/en-US/windows-vista/Tips-for-solving-problems-with-USB-devices
http://windows.microsoft.com/en-us/windows-vista/Install-a-USB-device
Method II
if the above method fails I would suggest you to delete upper filter and Lower filter, the following steps will help you to delete the filter.
REGISTRY EDIT DISCLAIMER:
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:
322756 How to back up and restore the registry in Windows :http://support.microsoft.com/kb/322756
1. Click Start, click Run, type regedit, and then click OK.
2. Locate and then click the UpperFilters registry value. This value is located in the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E967-E325-11CE-BFC1-08002BE10318}
3. On the Edit menu, click Delete, and then click OK.
4. Locate and then click the LowerFilters registry value. This value is located in the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E967-E325-11CE-BFC1-08002BE10318}
5. On the Edit menu, click Delete, and then click OK.
6. Exit Registry Editor.
7. Restart the computer.
Note If you remove both registry values, and then you lose functionality in a particular program such as CD recording software, you may have to reinstall that software. If this problem occurs again, contact the software vendor for help.
Hope this helps. Let us know the results.
Thanks & Regards,
Vijay – Microsoft Support
Visit our Microsoft Answers Feedback Forum and let us know what you think
---------------------------------------------------------------------------------------------------
Acredito que tenha sido no segundo método por ele mexer no registro do pc, devo ter feito algo de
errado que fez com que meu computador não iniciasse mais.Por favor me ajudem já não sei mais oque
fazer.
se tiver algum programa que eu possa baixar, ou um comando pelo prompt, sei lá qualquer coisa.
O computador não é só meu, então tem coisas do trabalho do meu irmão que não podem ser perdidas.
Eu posso fazer qualquer coisa que não venha perder meus documentos.
Então como eu disse lá em cima, o computador não inica em nenhum tipo de modo de segurança
ele trava após carregar
C:\Windows\System32\Drivers\ClassPNP.Sys
É já tentei restaurar O Sistema em um dia antes do problema, mas após todo o procedimento de
restauração aparece uma janela dizendo que não é possivel restaurar já que ocorreu um proplema
possivelmente um antivirus esteja impedindo. Eu não sei como interromper o Anti-virus sem ligar
o computador para tentar novamente uma restauração.
As opções do System Recovery Otions são:
1.Start Repair
2.System Restore
3.System Image Recovery
4.Windows Memory Diagnostic
5.Command Prompt
É.....Em Start Repair o Hide Problems details é:
--------------------------------------------------------
Problem signature:
Problem Event Name: StartupRepairOffline
Problem Signature 01: 6.1.7100.0
Problem Signature 02: 6.1.7100.0
Problem Signature 03: unknown
Problem Signature 04: 21200590
Problem Signature 05: AutoFailover
Problem Signature 06: 49
Problem Signature 07: CorruptAcl
OS Version: 6.1.7100.2.0.0.256.1
Locale ID: Meu id
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
X:\windows\system32\en-US\erofflps.txt
na porta aparecia essa mensagem "Code 43 Windows has stopped this device because it has reported
problems". Então eu resolvi pesquisar no google e encontrei aqui no site da Microsoft uma pergunta
e uma resposta sobre este problema que está logo abaixo:
-------------------------------------------------------------------------------------------
Question:
Code 43 Windows has stopped this device because it has reported problems
Applies To: Windows | Windows Vista | Hardware and Drivers
Essentially, my PC won't recognize my GoGear Opus MP3 player (or iPod nano). However, I am using
a USB mouse and keyboard at the moment with no problem. I had this same problem on this PC when
I had Vista. I upgraded to 7 hoping this issue would be solved, but it is still there.
Resposta:
Hi Makavali,
Welcome to Microsoft Answers forum.
Method I
I would suggest you to run the hot fix and see if that helps.
If your high-speed USB 2.0 ports don't work, you might not have the correct driver installed for the ports in your computer, or the ports might be defective. If you are using an external USB hub plugged into your computer, this might also be defective or lack the proper drivers. Check Device Manager to see if your USB ports or hubs are working properly.
1. Open Device Manager by clicking the Start button , clicking Control Panel, clicking System and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
2. Double-click Universal Serial Bus controllers and check to see if all your USB ports, hubs, and controllers are functioning correctly. Any devices not functioning will have a yellow exclamation mark in front of them.
3. If Device Manager shows any USB ports, hubs, or controllers are not functioning, check for updated drivers. For more information, see Update a driver for hardware that isn't working properly.
Additional Information: http://windows.microsoft.com/en-US/windows-vista/Tips-for-solving-problems-with-USB-devices
http://windows.microsoft.com/en-us/windows-vista/Install-a-USB-device
Method II
if the above method fails I would suggest you to delete upper filter and Lower filter, the following steps will help you to delete the filter.
REGISTRY EDIT DISCLAIMER:
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:
322756 How to back up and restore the registry in Windows :http://support.microsoft.com/kb/322756
1. Click Start, click Run, type regedit, and then click OK.
2. Locate and then click the UpperFilters registry value. This value is located in the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E967-E325-11CE-BFC1-08002BE10318}
3. On the Edit menu, click Delete, and then click OK.
4. Locate and then click the LowerFilters registry value. This value is located in the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E967-E325-11CE-BFC1-08002BE10318}
5. On the Edit menu, click Delete, and then click OK.
6. Exit Registry Editor.
7. Restart the computer.
Note If you remove both registry values, and then you lose functionality in a particular program such as CD recording software, you may have to reinstall that software. If this problem occurs again, contact the software vendor for help.
Hope this helps. Let us know the results.
Thanks & Regards,
Vijay – Microsoft Support
Visit our Microsoft Answers Feedback Forum and let us know what you think
---------------------------------------------------------------------------------------------------
Acredito que tenha sido no segundo método por ele mexer no registro do pc, devo ter feito algo de
errado que fez com que meu computador não iniciasse mais.Por favor me ajudem já não sei mais oque
fazer.
se tiver algum programa que eu possa baixar, ou um comando pelo prompt, sei lá qualquer coisa.
O computador não é só meu, então tem coisas do trabalho do meu irmão que não podem ser perdidas.
Eu posso fazer qualquer coisa que não venha perder meus documentos.
Então como eu disse lá em cima, o computador não inica em nenhum tipo de modo de segurança
ele trava após carregar
C:\Windows\System32\Drivers\ClassPNP.Sys
É já tentei restaurar O Sistema em um dia antes do problema, mas após todo o procedimento de
restauração aparece uma janela dizendo que não é possivel restaurar já que ocorreu um proplema
possivelmente um antivirus esteja impedindo. Eu não sei como interromper o Anti-virus sem ligar
o computador para tentar novamente uma restauração.
As opções do System Recovery Otions são:
1.Start Repair
2.System Restore
3.System Image Recovery
4.Windows Memory Diagnostic
5.Command Prompt
É.....Em Start Repair o Hide Problems details é:
--------------------------------------------------------
Problem signature:
Problem Event Name: StartupRepairOffline
Problem Signature 01: 6.1.7100.0
Problem Signature 02: 6.1.7100.0
Problem Signature 03: unknown
Problem Signature 04: 21200590
Problem Signature 05: AutoFailover
Problem Signature 06: 49
Problem Signature 07: CorruptAcl
OS Version: 6.1.7100.2.0.0.256.1
Locale ID: Meu id
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
X:\windows\system32\en-US\erofflps.txt
